В наличии Популярный товар
HVG-65-42B
HVG-65-42B MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 1550mA. 65,1W, 25,2-42V. Dimming..
$0.00
доллар США
3941 в наличии
Основные характеристики
Имя:
HVG-65-42B
Состояние:
Recommended Model
Формат:
Box
Ряд:
HVG-65-B
Информация о поставщике
MEANWELL
Товары: 6448
Обычно отправка осуществляется в течение 2-3 рабочих дней.
Гарантия качества
Быстрая доставка
Техническая поддержка
Технические характеристики
| Параметр | Ценить |
|---|---|
| Имя | HVG-65-42B |
| Состояние | Recommended Model |
| Формат | Box |
| Ряд | HVG-65-B |
| Затемнение | 0-10V, 1-10V, Resistance 0-100K, PWM Signal 10V |
| Утверждения | UL |
| Мощность (Вт) | 65,10 |
| Подформат | IP67 |
| Ширина (мм) | 61.50 |
| Высота (мм) | 36.80 |
| Максимальное входное напряжение переменного тока | 528,00 |
| Минимальное входное напряжение переменного тока | 180,00 |
| Приложения | Lighting |
| Производитель | MEAN WELL |
| Тип продукта | LED Driver |
| Изоляция (V) | 3.750,00 |
| Пиковая мощность (Вт) | 65.1 |
| Входной разъем | Cable |
| Входная частота | 50 Hz, 60 Hz |
| Длинный/Фон | 189.00 |
| Подробное описание | LED driver dimmable with phase input.Specially designed for powering LEDs directly in a steady stream.Format in metal box sealedIP67.Input range180-528Vca47-63Hz.Output in constant current1550mA.Range of output voltage with current mode constant25,2 to 42Vccaccording to demand load.Power:65,1 W.Efficiency typical:89.5 per cent.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10V,a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class I with grounding.Factor corrector, power>0,98to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+80ºC.Dimensions (Length x Width x Height):189 x 61.5 x 36,8 mm5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source can operate in either Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.The series HVG are LED drivers, class I grounded.You can also work in voltage mode constant giving a fixed voltage of 42V if the load is powered at constant voltage and does not overcome the maximum output power.With metal housing IP67. The series HVG has a high efficiency designed for applications of public lighting, exterior, interior, or any application of LED lighting. Approved HL Class I Division 2 for ex-zones in the US. Complies with the requirements of security at the global level for lighting.Can be adjusted by regulatory assets or liabilities0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Выходной разъем | Cable |
| Тип записи CA | Three-phase |
| Гарантия (лет) | 5,00 |
| Страна происхождения | China |
| Выходной ток, мА | One thousand five hundred fifty |
| Интенсивность минимального выходного сигнала (мА) | 1.550,00 |
| Максимальная интенсивность выходного сигнала (мА) | 1.550,00 |
Описание продукта
More details
Основные характеристики
- Промышленное качество
- Соответствует требованиям RoHS
- Сертификат CE
- Гарантия 1 год
Технические характеристики
LED driver dimmable with phase input.
Документация по продукту
Техническая спецификация
Технические характеристики и данные о производительности
Руководство пользователя
Руководство по установке и эксплуатации
