В наличии Популярный товар
PWM-90-24
PWM-90-24 MEANWELL AC-DC Single output LED driver Constant Voltage (CV), PWM output for LED strips, Output 2..
$0.00
доллар США
3473 в наличии
Основные характеристики
Имя:
PWM-90-24
Состояние:
High Turnover
Запас:
Yes
Формат:
Box
Информация о поставщике
MEANWELL
Товары: 6448
Обычно отправка осуществляется в течение 2-3 рабочих дней.
Гарантия качества
Быстрая доставка
Техническая поддержка
Технические характеристики
| Параметр | Ценить |
|---|---|
| Имя | PWM-90-24 |
| Состояние | High Turnover |
| Запас | Yes |
| Формат | Box |
| Ряд | PWM-90 |
| Затемнение | 0-10V, 1-10V, Resistance 0-100K, PWM Signal 10V |
| Утверждения | CCC, CE, ENEC, UL |
| Мощность (Вт) | 90,00 |
| Подформат | IP67 |
| Ширина (мм) | 63.00 |
| Высота (мм) | 37.50 |
| Максимальное входное напряжение переменного тока | 305,00 |
| Минимальное входное напряжение переменного тока | 90,00 |
| Приложения | Lighting |
| Производитель | MEAN WELL |
| Тип продукта | LED Driver |
| Изоляция (V) | 3.750,00 |
| Выходное напряжение | 24,00 |
| Пиковая мощность (Вт) | Ninety |
| Входной разъем | Cable |
| Входная частота | 50 Hz, 60 Hz |
| Длинный/Фон | 171.00 |
| Подробное описание | LED driver dimmable.Specially designed for the regulation of LED strips.Format in box waterproof plasticIP67.Input range90-305Vca47-63HzOutput voltage24vdc.Output intensity3,75 To. Range of output current 0-3,75 according To the demand load.Power:90W.Efficiency typical:Total of 90.5%.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10V,a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class II without grounding.Factor corrector, power>0,96to 230vac at full load.Consumption without load <0.5 W.Operating temperature range of caseTcfrom-40ºCup+85ºC.Dimensions (Length x Width x Height):171 x 63 x 37.5 mm5 years of warranty.Manufacturer: MEAN WELL.The series PWM are LED Drivers designed to work directly with LED strips. Must be equipment that is fed at constant voltage. With plastic housing designed for lighting applications in indoor, decorative or architectural. Approved HL Class I Division 2 for ex-zones in the US.Can be adjusted by regulatory assets or liabilities0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output.The output pulse can be regular any LED strip by small, is always to not overcome the maximum load of the driver.To be the driver and the regulator are integrated on the same computer we remove any kind of incompatibility and reduce the cost, size. Design of high frequency avoids any problem of noise audible to any level of regulation.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Выходной разъем | Cable |
| Тип записи CA | Single-phase |
| Гарантия (лет) | 5,00 |
| Страна происхождения | China |
Описание продукта
More details
Основные характеристики
- Промышленное качество
- Соответствует требованиям RoHS
- Сертификат CE
- Гарантия 1 год
Технические характеристики
LED driver dimmable.
Документация по продукту
Техническая спецификация
Технические характеристики и данные о производительности
Руководство пользователя
Руководство по установке и эксплуатации
