| Параметр | Ценить |
|---|---|
| Элемент | Specifications |
| Кабель | Suitable for round cable φ9 to φ11 mmφ0.354 to φ0.433 in |
| Выход | Relay contact 1a- Switching capacity: 2 50 V AC 3 A (resistive load), 30 V DC 3 A (resistive load)- Electrical life: 100,000 or more switching operations (switching frequency 1,200 operations/hour)- Mechanical life: 50 million or more switching operations (switching frequency 18,000 operations/hour) |
| Масса | Net weight: 100 g approx. |
| Подробности | Multi-voltage |
| Продукт | Adjustable Range Reflective Photoelectric Sensor |
| Материал | Enclosure: ABSFront cover: PolycarbonateDisplay cover: Polycarbonate |
| Аксессуар | Adjusting screwdriver: 1 pc. |
| Гистерезис | 10 % or less of operation distance(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object. |
| Защита | IP67 (IEC) |
| Номер детали | EQ-502 |
| Длина кабеля | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cabtyre cable. |
| Название продукта | Adjustable Range Reflective Photoelectric Sensor EQ-500 |
| Режим обнаружения | - |
| Время отклика | 20 ms or less |
| Номер изделия | EQ-502 |
| Напряжение питания | 24-240 V AC ±10 % or 12 to 240 V DC ±10 %Ripple P-P 10 % or less |
| Функция таймера | - |
| Регулируемый диапазон | 0.2 to 1.0 m0.656 to 3.281 ft(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m0.328 ft, or more, away.(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
| Влажность окружающей среды | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Излучающий элемент | Infrared LED (Peak emission wavelength: 855 nm0.034 mil, modulated) |
| Ударопрочность | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Способ подключения | Screw-on terminal connection |
| Регулятор расстояния | 2-turn mechanical adjuster with indicator |
| Приемный элемент | 2-segment photodiode |
| Окружающая освещенность | Incandescent light: 3,000 Lx or less at the light-receiving face |
| Температура окружающей среды | –20 to +55 ℃–4 to +131℉(No dew condensation or icing allowed),Storage: –30 to +70 ℃–22 to +158℉ |
| Индикатор работы | Orange LED (lights up when the output is ON) |
| индикатор стабильности | Green LED (lights up under stable operating condition) |
| Вибростойкость | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Сопротивление изоляции | 100 MOhm , or more, with 500 V DC megger among supply terminals, non-supply metal parts and relay contact output terminals as well as between relay contacts |
| Выход: Операция вывода | Switchable either Detection-ON or Detection-OFF |
| Выдерживаемое напряжение | 2,000 V AC for one min. among supply terminals, non-supply metal parts and relay contact output terminals, 1,000 V AC for one min. between relay contacts |
| Потребляемая мощность/ток | AC: 4 VA or lessDC: 3 W or less |
| Соответствие директиве о маркировке CE. | Low Voltage Directive, EMC Directive, RoHS Directive |
| Выход: Защита от короткого замыкания | - |
| Функция автоматического предотвращения помех | Incorporated(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object. |
| Диапазон обнаружения (при максимальном заданном расстоянии) | 0.1 to 1.0 m0.328 to 3.281 ft(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
Технические характеристики и данные о производительности
Руководство по установке и эксплуатации