| Параметр | Ценить |
|---|---|
| Элемент | Specifications |
| Кабель | 0.1 mm2 3-core cabtyre cable, 2 m 6.562 ft long |
| Выход | PNP open-collector transistor- Maximum source current: 50 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current) |
| Масса | Net weight: 20 g approxGross weight: 45 g approx |
| Подробности | Retroreflective[Side sensing] |
| Продукт | Ultra-compact Photoelectric Sensor |
| Материал | Enclosure: Polyethylene terephthalateLens: Polyalylate |
| Аксессуар | RF-200 (Reflector): 1 pcAdjusting screwdriver: 1 pc |
| Гистерезис | - |
| Защита | IP67 (IEC) |
| Номер детали | EX-29B-PN |
| Название продукта | Ultra-compact Photoelectric Sensor EX-20 Ver.2 |
| Время отклика | 0.5 ms or less |
| Диапазон обнаружения | 30 to 200 mm 1.181 to 7.874 in(Note) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-200 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 30 mm 1.181 in away. However, if the reflector is set 100 mm 3.937 in or less away, the sensing object should be opaque. |
| Номер изделия | EX-29B-PN |
| Объект восприятия | dia. 15 mm dia. 0.591 in or more opaque or translucent object(Note) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-200 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 30 mm 1.181 in away. However, if the reflector is set 100 mm 3.937 in or less away, the sensing object should be opaque.(Note) Make sure to confirm detection with an actual sensor before use. |
| Напряжение питания | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Удлинитель кабеля | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable. |
| Влажность окружающей среды | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Излучающий элемент | Red LED (modulated) |
| Ударопрочность | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Окружающая освещенность | Incandescent light: 3,000 lx or less at the light-receiving face |
| Температура окружающей среды | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit |
| Текущее потребление | 13 mA or less |
| Индикатор работы | Orange LED (lights up when the output is ON) |
| индикатор стабильности | Green LED (lights up under stable light received condition or stable dark condition) |
| Регулятор чувствительности | Continuously variable adjuster |
| Вибростойкость | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (20 G max.) in X, Y and Z directions for two hours each |
| Сопротивление изоляции | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| переключатель режима работы | - |
| Выдерживаемое напряжение | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Выходные данные: Категория использования | DC-12 or DC-13 |
| Соответствие директиве о маркировке CE. | EMC Directive, RoHS Directive |
| Выход: Защита от короткого замыкания | Incorporated |
| Излучающий элемент: Пиковая длина волны излучения | 680 nm 0.027 mil |
| Повторяемость (перпендикулярно оси измерения) | 0.5 mm 0.020 in or less |
Технические характеристики и данные о производительности
Руководство по установке и эксплуатации