| Параметр | Ценить |
|---|---|
| Элемент | Specifications |
| Кабель | 0.1 mm23-core PVC cabtyre cable, 2 m6.562 ftlong |
| Выход | NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.0 V or less (at 50 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Подробности | General purpose |
| Продукт | Leak Detection Sensor |
| Материал | Enclosure: Polypropylene |
| Защита | IP67 (IEC) |
| Номер детали | EX-F71 |
| Название продукта | Leak Detection Sensor EX-F70/EX-F60 |
| Время отклика | 50 ms or less |
| Номер изделия | EX-F71 |
| Объект восприятия | Water, Fluorinert™Note:Highly viscous liquid may not be detected stably.Note:Fluorinert is the world wide trademark of 3M. |
| Напряжение питания | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| Удлинитель кабеля | Extension up to total 50 m164.042 ft |
| индикатор НЕИСПРАВНОСТИ | Red LED (lights up when the leak liquid is detected, or the sensor is mounted improperly) |
| Влажность окружающей среды | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Излучающий элемент | Infrared LED (non-modulated) |
| Нормальный индикатор | Green LED (lights up when the sensor is mounted properly) |
| Окружающая освещенность | Incandescent light: 1,000 ℓx or less at the light-receiving face |
| Температура окружающей среды | -10 to +60 ℃+14 to +140 ℉(No dew condensation or icing allowed), Storage: -20 to +70 ℃- 4 to +158 ℉Note : Liquid being detected should also be kept within the rated ambient temperature range. |
| Текущее потребление | 10 mA or less(PNP output type: 15 mA or less) |
| Выход: Операция вывода | In normal state: ON, When leak detected or the sensor is mounted improperly: OFF |
| Выход: Защита от короткого замыкания | Incorporated |
Технические характеристики и данные о производительности
Руководство по установке и эксплуатации