| Параметр | Ценить |
|---|---|
| Элемент | Specifications |
| Кабель | 0.15 mm24-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m6.562 ftlong |
| Выход | PNP open-collector transistor- Maximum source current: 50 mA- Applied voltage: 26.4 V DC or less (between output and +V)- Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current) |
| Подробности | Thru-beam type |
| Продукт | Amplifier Built-in Ultra-compact Laser Sensor |
| Материал | Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate |
| Аксессуар | MS-EXL2-2 (Mounting plate): 2 pcs. |
| Защита | IP67 (IEC) |
| Номер детали | EX-L211-P-C5 |
| Название продукта | Amplifier Built-in Ultra-compact Laser Sensor EX-L200 |
| Повторяемость | Perpendicular to sensing axis: 0.05 mm0.0020 inor less |
| Время отклика | 0.5 ms or less |
| Диапазон обнаружения | 1 m3.281 ft |
| Номер изделия | EX-L211-P-C5 |
| Объект восприятия | Opaque object of ø2 mmø0.079 inor more |
| Напряжение питания | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Удлинитель кабеля | Extension up to total 50 m164.042 ftis possible with 0.3 mm2, or more, cable (thru-beam type: Total 100 m328.084 ftboth emitter and receiver). |
| Индикатор питания | Green LED (lights up when the power is ON) (incorporated on the emitter) |
| Влажность окружающей среды | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Излучающий элемент | Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB/ EN/ KS) (Note:This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH(Center for Devices and Radiological Health) under the FDA (Food and Drug Administration)(Maximum output: 1 mW, Peak emission wavelength: 655 nm0.026 mil) |
| Ударопрочность | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Окружающая освещенность | Incandescent light: 3,000 lx or less at the light-receiving face |
| Температура окружающей среды | -10 to +55 ℃+14 to +131 ℉(No dew condensation or no icing condition),Storage: -30 to +70 ℃-22 to +158 ℉ |
| Текущее потребление | Emitter: 10 mA or lessReceiver: 10 mA or less |
| Индикатор работы | Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type) |
| индикатор стабильности | Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type) |
| Регулятор чувствительности | Continuously variable adjuster (incorporated on the receiver) |
| Вибростойкость | 10 to 500 Hz frequency, 1.5 mm0.059 indouble amplitude (10 G max.) in X, Y and Z directions for two hours each |
| Сопротивление изоляции | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Соответствие нормативным требованиям | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Выход: Операция вывода | Light-ON / Dark-ON selectable by the output operation switching input |
| Выдерживаемое напряжение | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Размер пятна излучения (типичный) | Approx. 6 × 4 mm0.236 × 0.157 in(vertical × horizontal)(at a sensing distance of 1 m) |
| Выход: Защита от короткого замыкания | Incorporated (short-circuit protection / inverse polarity protection) |
| Минимальный объект для измерения (типичный) | Opaque object of ø0.3 mmø0.012 in(Note)Typical values when the sensitivity adjuster is optimally adjusted. |
| Повторяемость (типичная) (перпендикулярно оси измерения) | 0.01 mm0.0004 inor less(all area)(Note)Typical values when the sensitivity adjuster is optimally adjusted. |
Технические характеристики и данные о производительности
Руководство по установке и эксплуатации