| Параметр | Ценить |
|---|---|
| Элемент | Specifications |
| Кабель | 0.15 mm23-core oil, heat and cold resistant cabtyre cable, 1 m3.281 ftlong |
| Выход | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between output and +V)- Residual voltage: 2 V or less (at 100 mA source current) |
| Подробности | PNP output |
| Продукт | Rectangular-shaped Inductive Proximity Sensor |
| Материал | Enclosure: PBTIndicator part: Polyester |
| Гистерезис | 20 % or less of operation distance(with standard sensing object) |
| Вес нетто | 20 g approx. |
| Защита | IP68 (IEC), IP68g (JEM)(Note) Panasonic Electric Works SUNX's IP68 test method1. Immerse at 0 m below 0 ℃+32 ℉water surface and leave for 30 min. Then, immerse at 0 m below +70 ℃+158 ℉water surface and leave for 30 min.2. Regard the heat shock test in 1 as one cycle and perform 20 cycles.3. Leave in water at a depth of 1 m3.281 ftin water for 500 hours.4. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.(Note) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. |
| Номер детали | GX-F12B-P |
| Название продукта | Rectangular-shaped Inductive Proximity Sensor GX-F/H |
| Повторяемость | Along sensing axis, perpendicular to sensing axis: 0.04 mm0.002 inor less |
| Номер изделия | GX-F12B-P |
| Напряжение питания | 12 to 24 V DC +10/-15 % Ripple P-P 10 % or less |
| Удлинитель кабеля | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
| Влажность окружающей среды | 45 to 85 % RH, Storage: 35 to 95 % RH |
| Ударопрочность | 10,000 m/s2acceleration (1,000 G approx.) in X, Y and Z directions three times each |
| Температура окружающей среды | -25 to +70 ℃-13 to +158 ℉, Storage: - 40 to +85 ℃- 40 to +185 ※ |
| Текущее потребление | 15 mA or less |
| Индикатор работы | Orange LED(lights up when the output is ON) |
| Стабильный диапазон обнаружения | 0 to 3.3 mm0 to 0.130 in(Note) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. |
| Вибростойкость | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (Max. 20 G) in X, Y and Z directions for two hours each |
| Сопротивление изоляции | 50 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Максимальное рабочее расстояние | 4.0 mm0.158 inplus or minus 8 %(Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. |
| Максимальная частота отклика | 500 Hz |
| Выход: Операция вывода | Normally closed |
| Стандартный сенсорный объект | Iron sheet 20 × 20 × t 1 mm0.787 × 0.787 × t 0.039 in |
| Выдерживаемое напряжение | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Выходные данные: Категория использования | DC-12 or DC-13 |
| Применимые правила и сертификаты | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Изменение диапазона чувствительности: характеристики напряжения | Within plus or minus 2 % for +10/-15 % fluctuation of the supply voltage |
| Изменение диапазона чувствительности: температурные характеристики | Over ambient temperature range -25 to +70 ℃ -13 to +158degrees Fahrenheit: Within plus or minus 8 % of sensing range at +23 ℃ +73 ℉ |
Технические характеристики и данные о производительности
Руководство по установке и эксплуатации