| Параметр | Ценить |
|---|---|
| Элемент | Specifications |
| Примечание | Where measurement conditions have not been specified precisely, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature +20 ℃+68 ℉, and a clean atmosphere where dust and liquids such as water and oil do not come in contact with the equipment. |
| Гладить | 32.5 mm1.280 inor more |
| Масса | Net weight: 150 g approx. |
| Подробности | 32 mm1.260 intypeGeneral purpose Standard type |
| Продукт | Contact-Type Digital Displacement Sensor |
| Материал | Body: Aluminum, Holder: Stainless steel, Spindle: Free-cutting steel, Probe※: Brass (body) / Ceramic (ball), Rubber bellows: NBR (black)※The probes (optional) are also available. |
| Аксессуар | Sensor head fastening wrench 1 pc., Mounting nut 1 pc. |
| Разрешение | 0.5 μm0.020 mil |
| Номер детали | HG-S1032 |
| Название продукта | Contact-Type Digital Displacement Sensor HG-S |
| Частота дискретизации | 1ms |
| Номер изделия | HG-S1032 |
| Диапазон измерений | 32mm1.260 in |
| Метод заземления | Capacitor grounding |
| Степень загрязнения | 2 |
| функция горячей замены | Incorporated |
| Рабочая высота | 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| Индикатор работы | 2-color LED (Orange / Green) |
| Величина отклонения наконечника | 40 μm1.575 mil(typical)(Note):Linearity F.S. = 16 mA, and is linearity with respect to digitally measured values. |
| Применимый контроллер | HG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113 |
| Сопротивление изоляции | 100 MΩ or more at 250 V DC |
| Соответствие нормативным требованиям | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Точность показаний (PP) | Full range: 3.0 μm0.118 milor lessNarrow range: 2.0 μm0.079 milor less(any 60 μm2.362 mil) |
| Метод определения положения | Optical absolute linear encoder method |
| Измерение силы: боковое крепление | 2.53 N or less1.50 N(Note 1): Typical value near center of measurement. |
| Измерение силы: крепление вверх | 2.09 N or less1.19 N(Note): Typical value near center of measurement. |
| Измерение силы: крепление вниз. | 2.97 N or less1.90 N(Note): Typical value near center of measurement. |
| Экологическая устойчивость: защита | IP67 (IEC)(Note): Excludes damage and deterioration to rubber bellows due to external causes. |
| Устойчивость к воздействию окружающей среды: влажность воздуха | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Устойчивость к воздействию окружающей среды: ударопрочность | 1,960 m/s2acceleration in X, Y and Z directions three times each |
| Устойчивость к воздействию окружающей среды: температура окружающей среды | -10 to +55 ℃+14 to +131 ℉(No condensation or icing),Storage: -20 to +60 ℃-4 to +140 ℉ |
| Устойчивость к воздействию окружающей среды: Вибростойкость | 10 to 150 Hz frequency, 3 mm0.118 indouble amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each |
Технические характеристики и данные о производительности
Руководство по установке и эксплуатации