В наличии Популярный товар
UHGS1110AC
UHGS1110AC HG-S1110-AC PANASONIC HG-S Sensor for measurement by contact. Head sensor with pneumatic actuator..
$0.00
доллар США
4607 в наличии
Основные характеристики
Элемент:
Specifications
Примечание:
Where measurement conditions are not specified, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature of +20 ℃+68 ℉, and a clean atmosphere where water, oil, other liquids or dust does not come in contact with the equipment.
Гладить:
10.5 mm0.413 inor more(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point.
Масса:
Net weight: 80 g approx.
Информация о поставщике
PANASONIC
Товары: 4316
Обычно отправка осуществляется в течение 2-3 рабочих дней.
Гарантия качества
Быстрая доставка
Техническая поддержка
Технические характеристики
| Параметр | Ценить |
|---|---|
| Элемент | Specifications |
| Примечание | Where measurement conditions are not specified, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature of +20 ℃+68 ℉, and a clean atmosphere where water, oil, other liquids or dust does not come in contact with the equipment. |
| Гладить | 10.5 mm0.413 inor more(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point. |
| Масса | Net weight: 80 g approx. |
| Подробности | Air-driven type10 mm0.394 intype High precision |
| Продукт | Contact-Type Digital Displacement Sensor |
| Материал | Body: Zinc, Holder: Stainless steel, Spindle: Tool steel, Probe (Note): Brass (body) / Ceramic (ball),, Air tube clamp: S60CM(Note) : The probe is also available as an option. |
| Аксессуар | Sensor head fastening wrench: 1 pc., Mounting nut: 1 pc., Seal cap: 1pc, Air tube clamp: 1 pc. |
| Разрешение | 0.1 μm0.004 mil |
| Номер детали | HG-S1110-AC |
| Название продукта | Contact-Type Digital Displacement Sensor HG-S |
| Пригодная для использования жидкость | Clean air (Dew point temperature: -10 ℃+14 ℉or less) |
| Частота дискретизации | 1 ms |
| Номер изделия | HG-S1110-AC |
| Применимая трубка | Outside diameter: ø4 mmø0.157 in/ Inside diameter: ø2.5 mmø0.098 in |
| Измерение силы | ・Measuring force changes with the air pressure used. Removing the seal cap enables the product to be used as the low measuring force type.・For the relationship between supplied air pressure and measuring force or between measuring force and pushed spindle position, see the figures below. For upward mount without a seal cap, subtract 0.2 N from the measuring force. For side mount, subtract 0.1 N from the measuring force. The following figures are only typical examples, and these relationships differ depending on the assembly accuracy of the product or the abrasion status of sealing materials. |
| Диапазон измерений | 10 mm0.394 in(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point. |
| Метод заземления | Capacitor grounding |
| Степень загрязнения | 2 |
| функция горячей замены | Incorporated |
| Рабочая высота | 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| Индикатор работы | Equipped (2-color LED: Orange / Green) |
| Величина отклонения наконечника | 35 μm1.378 mil(typical value) |
| Применимый контроллер | HG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113(Note) : Be sure to use the sensor in combination with an HG-SC□ controller manufactured in or after February 2019. |
| Сопротивление изоляции | 100 MΩ or more at 250 V DC |
| Соответствие нормативным требованиям | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Диапазон рабочего давления | 0.14 to 0.16 MPaWith no seal cap mounted : 0.035 to 0.045 MPa |
| Точность показаний (PP) | Full range: 1.0 μm0.039 milor lessLimited range: 0.5 μm0.02 milor less(any 60 μm2.362 mil) |
| Метод определения положения | Optical absolute linear encoder method |
| Способность противостоять давлению | 0.2 MPa |
| Экологическая устойчивость: защита | IP67 (IEC)With no seal cap mounted : -(Note) : Protective structure is not applicable when the sealing portions have deteriorated or become damaged. The protection level is zero when the seal cap is removed. |
| Устойчивость к воздействию окружающей среды: влажность воздуха | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Устойчивость к воздействию окружающей среды: ударопрочность | 1,960 m/s2acceleration in X, Y, and Z directions three times each |
| Устойчивость к воздействию окружающей среды: температура окружающей среды | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +60 ℃-4 to +140 ℉ |
| Устойчивость к воздействию окружающей среды: Вибростойкость | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (10 to 58 Hz), maximum acceleration 196 m/s2, (58 to 150 Hz) in X, Y, and Z directions for two hours each |
Описание продукта
HG-S - Contact measurement sensor. Sensor head with pneumatic actuator. Resolution 0.1μm. Precision 1μm. Range 10mm
Основные характеристики
- Промышленное качество
- Соответствует требованиям RoHS
- Сертификат CE
- Гарантия 1 год
Документация по продукту
Техническая спецификация
Технические характеристики и данные о производительности
Руководство пользователя
Руководство по установке и эксплуатации
