В наличии Популярный товар
ULSH901
ULSH901 LS-H901 PANASONIC Sensor head, retro reflective, range 1m, cable 2m
$0.00
доллар США
3159 в наличии
Основные характеристики
Элемент:
Specifications
Кабель:
0.09 mm22-core two parallel shielded cables, 2 m 6.562 ft long(Note：Cable cannot be extended.)
Масса:
Net weight: 50 g approx.Gross weight: 85 g approx.
Подробности:
Sensor heads(Coaxial retroreflective type)
Информация о поставщике
PANASONIC
Товары: 4316
Обычно отправка осуществляется в течение 2-3 рабочих дней.
Гарантия качества
Быстрая доставка
Техническая поддержка
Технические характеристики
| Параметр | Ценить |
|---|---|
| Элемент | Specifications |
| Кабель | 0.09 mm22-core two parallel shielded cables, 2 m 6.562 ft long(Note：Cable cannot be extended.) |
| Масса | Net weight: 50 g approx.Gross weight: 85 g approx. |
| Подробности | Sensor heads(Coaxial retroreflective type) |
| Продукт | Amplifier-separated Type Digital Laser Sensor |
| Материал | Enclosure: PBTIndicator cover: PolycarbonateBeam-emitting / receiving surfaces: Glass |
| Аксессуар | MS-LS-1(Mounting bracket): 1pc.RF-330(Refrector): 1pc. |
| Размер пятна | Approx. dia. 6 mm dia. 0.236 in or less (at a distance from the sensor head of 1 m 3.281 ft) |
| Защита | IP40 (IEC) |
| Номер детали | LS-H901 |
| Название продукта | Amplifier-separated Type Digital Laser Sensor LS-500 |
| Номер изделия | LS-H901 |
| Объект восприятия | Opaque, translucent, or transparent object(Note：Make sure to confirm detection with an actual sensor before use.) |
| Влажность окружающей среды | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ударопрочность | 98 m / s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| Диапазон обнаружения: HYPR | 0.01 to 2.5m0.033 to 8.202 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Диапазон обнаружения: U-LG | 0.01 to 2m0.033 to 6.562 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Окружающая освещенность | Incandescent light: 3,000 ℓx or less at the light-receiving face |
| Температура окружающей среды | -10 to +55degrees + 14 to + 131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70degrees -4 to +158 degrees Fahrenheit |
| Индикатор работы | Orange LED (lights up when the amplifier output is ON) |
| Вибростойкость | 10 to 500 Hz frequency, 1.5 mm double amplitude or maximum acceleration 98 m/s2in X, Y, and Z direction for 2 hours each. |
| Применимые усилители | LS-501(P), LS-501(P)-C2(Note：When using the thru-beam typeLS-H101□orLS-H102□, do not set the receiving light sensitivity (gctL) of the applicableLS-500series amplifier to level 2 or less. This is because there is a possibility of sensing becoming unstable.) |
| Излучающий элемент: Тип | Red semiconductor laser diode |
| Сопротивление изоляции | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Соответствие нормативным требованиям | EMC Directive, RoHS Directive |
| Диапазон обнаружения: стандартный режим | 0.01 to 1m0.033 to 3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Диапазон обнаружения: режим FAST | 0.01 to 1m0.033 to 3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Диапазон чувствительности: режим H-SP | 0.01 to 1m0.033 to 3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Диапазон обнаружения: режим U-LG | 0.01 to 1.5m0.033 to 4.921 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Выдерживаемое напряжение | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Излучающий элемент: лазерный класс | Class 1 [IEC / EN / JIS / GB / KS / FDA](Note：This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3. |
| Излучающий элемент: Макс. выходная мощность | 1mW |
| Излучающий элемент: Пиковая длина волны излучения | 660 nm 0.026 mil |
Описание продукта
LS500. Sensor head, reflection on mirror, range 1m
Основные характеристики
- Промышленное качество
- Соответствует требованиям RoHS
- Сертификат CE
- Гарантия 1 год
Документация по продукту
Техническая спецификация
Технические характеристики и данные о производительности
Руководство пользователя
Руководство по установке и эксплуатации
