| Параметр | Ценить |
|---|---|
| Элемент | Specifications |
| Кабель | 0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong |
| Выход | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) |
| Масса | Net weight: Emitter 80 g approx., Receiver 85 g approxGross Weight: 210 g approx. |
| Подробности | PNP output |
| Продукт | Small / Slim Object Detection Area Sensor |
| Материал | Enclosure: Heat-resistant ABSLens: AcrylicIndicator cover: Acrylic |
| Защита | IP62 (IEC) |
| Номер детали | NA1-11-PN |
| Название продукта | Small / Slim Object Detection Area Sensor NA1-11 |
| Элемент питч | 10 mm0.394 in |
| Время отклика | In Dark state: 5 ms or lessIn Light state: 10 ms or less |
| Диапазон обнаружения | 0.17 to 1 m0.558 to 3.281 ft(Note:The sensing range is the possible setting distance between the emitter and the receiver. The sensor can detect an object less than 0.17 m 0.558 ft away.) |
| Номер изделия | NA1-11-PN |
| Определение высоты | 100 mm3.937 in |
| Объект восприятия | ø13.5 mmø0.531 inor more opaque object(Note:Although this product can detect slim objects by using the cross-beam scanning system, the size of the slim object which can be stably detected differs with the setting distance. When this sensor is used to detect slim objects, make sure to confirm stable detection using the actual objects.) |
| Напряжение питания | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Удлинитель кабеля | Extension up to total 100 m 328.084 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable. |
| Влажность окружающей среды | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Излучающий элемент | Infrared LED (Peak emission wavelength: 880nm0.035mil, cross-beam scanning system) |
| Степень загрязнения | 3 (Industrial environment) |
| Ударопрочность | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Индикаторы: Излучатель | Power indicator: Green LED (lights up when the power is ON)Large indicator: Orange LED (lights up or blinks when the large indicator input is High, lighting pattern is selected by operation mode switch) |
| Окружающая освещенность | Incandescent light: 3,000 lx or less at the light-receiving face |
| Температура окружающей среды | -10 to 55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| Текущее потребление | Emitter: 80 mA or lessReceiver: 100 mA or less |
| Индикаторы: Приёмник | Operation indicator: Orange LED (lights up when the output is ON)Power indicator: Green LED (lights up when the power is ON)Large indicator: Orange LED (lights up or blinks when the large indicator input is High, lighting pattern is selected by operation mode switch) |
| Вибростойкость | 10 to 150 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Сопротивление изоляции | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Выход: Операция вывода | ON or OFF when beam channel is interrupted, selectable by operation mode switch |
| Выдерживаемое напряжение | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Выходные данные: Категория использования | DC-12 or DC-13 |
| Соответствие директиве о маркировке CE. | EMC Directive, RoHS Directive |
| Выход: Защита от короткого замыкания | Incorporated |
| Количество излучающих/принимающих элементов | 11 Nos. each on the emitter and the receiver, respectively |
Технические характеристики и данные о производительности
Руководство по установке и эксплуатации