| Параметр | Ценить |
|---|---|
| Элемент | Specifications |
| PFHD | 3.74 × 10-9(Note) Probability of dangerous failure per hour. |
| Кабель | 0.16 mm25-core heat-resistant PVC cable, 3 m 9.842 ft long |
| МТТФД | 100 years or more(Note) Mean time to dangerous failure. |
| Подробности | Hand protection type Min. sensing object ø25 mmø0.984 in(20 mm0.787 inbeam pitch) |
| Продукт | Ultra-slim Light Curtain [Type 2 PLc SIL1] |
| Материал | Enclosure: Polycarbonate alloySensing surface: Polycarbonate alloyMS-SFC-1 (Standard mounting bracket): Stainless steel (SUS) |
| Шаг луча | 20 mm0.787 in |
| Аксессуары | MS-SFC-1 (Standard mounting bracket): 1 setSF4C-TR25 (Test rod): 1 No. |
| Номер детали | SF2C-H8-N |
| Название продукта | Ultra-slim Light Curtain [Type2 PLc SIL1] SF2C |
| Напряжение питания | 24 V DC plus or minus 20 % Ripple P-P 10 % or less |
| Время отклика | OFF response: 20 ms or lessON response: 80 to 100 ms |
| Номер изделия | SF2C-H8-N |
| Удлинитель кабеля | Extension up to total 50m is possible for 0.3mm2or more, cable |
| Рабочий диапазон | 0.1 to 3 m0.328 to 9.843 ft |
| Излучающий элемент | Infrared LED (Peak emission wavelength: 850 nm0.034 mil) |
| Степень загрязнения | 3 |
| Защитная высота | 160 mm6.299 in |
| Рабочая высота | 2, 000 m6561.680 ftor less(Note) Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m. |
| Окружающая освещенность | Incandescent light: 5,000 ℓx or less at the light-receiving face |
| Выход блокировки (SSD) | - Maximum sink current: 60mA- Applied voltage: same as supply voltage (between the lockout output and -0V)- Residual voltage: 2.5V or less (sink current 60mA, when using 10m length cable)- Leakage current: 200micro A or less (power supply OFF condition)- Maximum load capacity: 2.2micro F (No load to maximum output current)- Load wiring resistance: 3Ω or less |
| Минимальный сенсорный объект | ø25 mmø0.984 inopaque object |
| Функция ввода теста | Incorporated |
| Управляющий вывод (OSSD) | - Maximum sink current: 200mA- Applied voltage: same as supply voltage (between the control output and -0V)- Residual voltage: 2.5V or less (sink current 200mA, when using 10m length cable)- Leakage current: 200micro A or less (power supply OFF condition)- Maximum load capacity: 2.2micro F (No load to maximum output current)- Load wiring resistance: 3Ω or less |
| Количество каналов пучка | 8 |
| Эффективный угол апертуры | plus or minus 5℃ or less [for an operating range exceeding 3 m 9.843 ft (conforming to IEC 61496-2 / ANSI/UL 61496-2) ] |
| Применимые стандарты: Япония | JIS B 9704-1 / 2 (Type 2), JIS B 9705-1 (Category 2), JIS C 0508-1 to 3 (SIL 1) |
| Применимые стандарты: Европа | EN 61496-1 (Type 2), EN ISO 13849-1:2015 (Category 2, PLc), EN 61508-1 to 3 (SIL 1), EN 55011, EN 50178, EN 61000-6-2(Note) Regarding EU Machinery Directive, a Notified Body, TÜV SÜD, has certified with the type examination certificate. |
| Функция предотвращения помех | Incorporated |
| Применимые стандарты: Северная Америка | ANSI / UL 61496-1 / 2 (Type 2), ANSI / UL 508, CAN / CSA 61496-1 / 2 (Type 2), CAN / CSA C22.2 No.14, ANSI / RIA 15.06(Note) With regards to the standards in the US/Canada, a Notified Body, TÜV SÜD, has certified the CTÜVUS mark. |
| Выход блокировки (SSD): режим работы | ON during normal operation, OFF during lockout(Note) If the emitter enters a lockout state, and light from the emitter enters the receiver, lockout information will be transmitted and lockout output (SSD) will turn OFF. |
| Выход управления (OSSD): Режим работы | ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the safety light curtain or the synchronization signal) |
| Большая многофункциональная индикаторная функция | Incorporated |
| Выход блокировки (SSD): Схема защиты | Incorporated |
| Выход управления (OSSD): цепь защиты | Incorporated |
| Применимые правила и сертификаты | CE Marking (Machinery Directive, EMC Directive, RoHS Directive), UKCA Marking [Supply of Machinery (Safety) Regulations, EMC Regulations, RoHS Regulations], TÜV SÜD certification |
| Устойчивость к воздействию окружающей среды: влажность окружающей среды | 30 to 85 % RH, Storage: 30 to 85 % RH |
| Устойчивость к воздействию окружающей среды: ударопрочность | 300 m / s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| Вес нетто (суммарно вес излучателя и приемника) | 280 g approx. |
| Применимые стандарты: Международный стандарт | IEC 61496-1 / 2 (Type 2), ISO 13849-1:2015 (Category 2, PLc), IEC 61508-1 to 3 (SIL 1) |
| Устойчивость к воздействию окружающей среды: температура окружающей среды | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: - 25 to +60 ℃- 13 to +140 ℉ |
| Экологическая устойчивость: Степень защиты | IP65, IP67 (IEC) |
| Устойчивость к воздействию окружающей среды: Виброустойчивость | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Устойчивость к воздействию окружающей среды: Сопротивление изоляции | 20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Устойчивость к воздействию окружающей среды: выдерживаемое напряжение | 1, 000 V AC for one min. between all supply terminals connected together and enclosure |
| Потребляемый ток: Загорается большой многофункциональный индикатор. | Emitter: 35 mA or lessReceiver: 30 mA or less |
| Потребление тока: Большие многофункциональные индикаторные лампы выключены. | Emitter: 25 mA or lessReceiver: 25 mA or less |
Технические характеристики и данные о производительности
Руководство по установке и эксплуатации