| Параметр | Ценить |
|---|---|
| Элемент | Specifications |
| Кабель | Shielded cable with connector, 1 m3.281 ftlong |
| Подробности | Sensor head |
| Продукт | Compact Type 4 Safety Beam Sensor |
| Материал | Enclosure: PBT (Polybutylene terephthalate)Lens: AcrylicIndicator cover: Acrylic |
| Номер детали | ST4-A1-J1V |
| Название продукта | Compact Type 4 Safety Beam Sensor ST4 |
| Напряжение питания | Supplied from controller |
| Номер изделия | ST4-A1-J1V |
| Объект восприятия | φ9 mmφ0.354 inor more opaque object |
| Удлинитель кабеля | Extention up to total 50 m164.042 ftis possible for both emitter and receiver with exclusive cable. |
| Рабочий диапазон | 0.1 to 15 m0.328 to 49.213 ft(Note:The operating range is the possible setting distance between the emitter and the receiver. It can detect sensing object of less than 0.1 m 0.328 ft away.) |
| Излучающий элемент | Infrared LED (Peak emission wavelength: 870 nm0.034 mil) |
| Окружающая освещенность | Incandescent lamp: 3,500 Lx or less at the light-receiving face |
| Текущее потребление | Emitter: 11 mA or lessReceiver: 9 mA or less |
| Применимые стандарты | IEC 61496-1/2 (JIS B 9704-1/2 / UL 61496-1/2) (Type 4), ISO 13849-1:2015 (Category 4, PLe), JIS B 9705-1 (Category 4), IEC 61508-1 to 3 (SIL3), IEC 62061 (SIL3), JIS C 0508-1 to 3 (SIL3), UL 1998, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA R15.06, ANSI/ISA S84.01 (SIL3)(Note) Complies with those standards only when the sensor head is used in combination with the controller ST4-C11 / ST4-C12EX. |
| Индикатор излучения луча | Green LED (lights up during beam emission, lights off during emission halt) |
| Эффективный угол апертуры | plus or minus 2.5degrees or less for operating range exceeding 3 m 9.843 ft (required by IEC 61496-2 / UL 61496-2) |
| Индикатор прерывания луча | Red LED (lights up when the beam is interrupted or lock out, lights off during reception)(Note) Shows light interruption information between the emitter and the receiver with the same address. It does not show OSSD output. |
| Индикатор стабильного падающего луча | Green LED (lights up under stable light received condition, lights off under unstable light received condition) |
| Соответствие директиве о маркировке CE. | Machinery Directive, EMC Directive, RoHS Directive |
| Вес (суммарно вес излучателя и приемника) | Net weight: 100 g approx.Gross weight: 140 g approx. |
| Устойчивость к воздействию окружающей среды: влажность окружающей среды | 30 to 85 % RH, Storage: 30 to 95 % RH |
| Устойчивость к воздействию окружающей среды: ударопрочность | 300 m/s2acceleration in X, Y and Z directions three times each |
| Устойчивость к воздействию окружающей среды: температура окружающей среды | -10 to +55 ℃+14 to +131℉(No dew condensation or icing allowed),Storage: -25 to +70 ℃-13 to +158℉ |
| Экологическая устойчивость: Степень защиты | IP67 (IEC) |
| Устойчивость к воздействию окружающей среды: Виброустойчивость | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 90 m/s2 in X, Y and Z directions for two hours each< |
| Устойчивость к воздействию окружающей среды: Сопротивление изоляции | 20 MOhm or more with 500V DC megger between all supply terminals connected together and enclosure |
| Устойчивость к воздействию окружающей среды: выдерживаемое напряжение | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Технические характеристики и данные о производительности
Руководство по установке и эксплуатации